Summary：
High temperature resistant adhesive organic series (high temperature glue) mostly with silicone as the carrier, the highest temperature is generally not more than 400 degrees Celsius, the temperature will exceed the carbonization or softening, and high temperature resistant adhesive inorganic series is able to withstand high temperature at 1000 degrees Celsius, our production of high temperature resistant adhesive XZ-T002. The adhesive resistance of 1500 DEG C or higher temperature, the material Department of Yunnan University to test the thermal conductivity of 0.06w/m*k, uses a wide range of thin coating can play a very good anti oxidation effect of corrosion, but not thick coating can play a very good anti oxidation effect of corrosion, but also can play the heat insulation insulation effect.
XZ-T002 can be used as ceramic, glass, metal and other coating materials, widely used in metallurgy furnace, quartz heating tube, plated white coal pulverizing system impact corrosion wear of ceramic coating coating, plug car engine spark anti carbon steel, tempered glass, logo LOGO logo, heat-resistant glass printing ink, aerospace and other industrial fields. Spraying at room temperature in glass, ceramic, metal and other objects surface, low temperature drying or dry at room temperature, and the surface of the adhesion is very good, hard wear-resisting scratch resistant, not cracking, excellent performance.
Performance characteristics:
Name
|
High temperature resistant adhesive
|
Model
|
XZ-T002
|
Appearance
|
White, sticky liquid
|
High temperature resistance
|
1500 C, the short time resistant to 1800 C or higher
|
Table dry
|
30min
|
Minimum re coating intervalhardness
|
2H
|
hardness
|
5H
|
tolerance
|
Good oil resistance; acid resistance and alkali resistance
|
Coating thickness:
According to the customer's own needs, can be arbitrary thickness, construction requires layers of spray or brush, if you need to apply a relatively thick thickness, the first coating layer thickness can be controlled in 1-2mm, then in the low temperature 80 degrees Celsius or at room temperature to dry thoroughly, to continue the construction with two layer, three layer, four layer. Only after thoroughly dry can be used in the high temperature state.
Application range:
High temperature resistant adhesive XZ-T002 is widely used in metallurgical furnace, quartz heating tube, coal pulverizing system impact corrosion wear of ceramic coating coating, plug car engine spark anti carbon steel, tempered glass, logo LOGO logo, heat-resistant glass printing ink, aerospace and other industrial fields. The adhesive is a water binder, and the hardness of the drying and forming can reach more than 5H after drying. The substrate surface should be clean and dry, no grease, dust, salt and other impurities, the damaged area should be manual cleaning and repair, when used according to specific requirements, can apply 0.1mm to several centimeters in thickness, coating, film forming, on the surface of the glass, quartz tube, ceramic and metal coating materials to do with antioxidant protection.
|
